Industrial Blowers And Fans

« Back

AXIAL FLOW FANS

1. SUPPLY AND EXHAUST FANS
   Size : 450 mm to 2000 mm sweep
   Capacity : 2000 to 2,50,000 CMH
   Pressure : upto 65 mmwg.
   
   Housing fabricated from heavy gauge sheet, impeller is having high efficiency aero-foil section fixed or adjustable pitch blades , impellers are statically and dynamically balanced as per relevant standards, Inlet cone and outlet diffuser can be provided to further improve the efficiency depending upon the application.

2. ROOF EXTRACTORS
   The roof extractor is a motor driven fan unit and is provided with durable weather proof exhaust hood.This is ideal for extraction or air supply through the roof,usually preferred in factories, power plant, steel plant and foundries
   
   
3. BIFURCATOR FANS
   This fan is mostly placed to exhaust the air of corrosive nature or hazardous for the motor. In this, the motor is not in the stream of air, thus remain protected from the contaminated gas stream .
   
   
4. MINE VENTILATION FAN
   This is a high pressure fan comprising of two impellers with different number of blades,connected in series and rotating in opposite directions. Each impeller is driven by a direct-coupled motor. The axial flow fan type has a wide range of applications and has proved especially suitable for ventilation of Mines,Tunnels etc. where it can be directly fitted into the ventilation duct.It is further important to note that this fan is reversible and therefore, it can be used both as supply and exhaust fan.
   
   
5. INDUSTRIAL MANCOOLERS
   We bring an effective solution to the cooling problem in the industrial working places for men , materials and machines. The Range covers the following three types of mancoolers:
   

   VMT    -   VMB   - VMP   -

   Tubular Mounted Column Mounted (having provision for tilting and swivelling) Foot/Pedestal Mounted.

   All these mancoolers are fitted with a totally enclosed fan cooled motor, cast alloy aluminium impeller, strong wire guard and are complete with its required mountings/fittings.
   
   
6. GREEN HOUSE FAN
   

   Size Model Capacity

   : 1200 mm ( 48 “ dia ) with louvers : VSGH – 1200 : 15000 CFM with 1.5 HP / 4 Pole Motor : 18000 CFM with 1.5 HP / 4 Pole Motor : 22000 CFM with 2.0 HP / 4 Pole motor

Propeller type Axial flow air fans for green house application, with 6 bladed stainless steel impeller balanced for noiseless air flow on cast aluminium mounted hub, outer casing of GI construction with inlet 1” X 1” wire mesh guard , Aluminium exhaust louvers at its outlet complete with auto louver opening device and V- belt drive arrangement with pulleys.

---

Our Products

Centrifugal Blowers || Axial Flow Fan/Air Circulator Fans || Cyclones and Multi-Cyclones || Evaporative Air Cooling Units (Air Washers) || Mechanical Shaking Type Filters/Bag Filters || Fume Scrubbers/Venturi Scrubbers || Other System Accessories

---